Видео

Thanks, normally people go slow. You went really fast. I would say hold the select button until you hear the beep and the indicator goes to 100%. But thank you.

I'm literally doin mechanical engineering practical I wanna say thanks you guys have been helping me a lot

Just chillin’, hangin’ out in the condenser 😎 haha

Damn good video

That’s pretty good

You needed a top 20 issues. It's a Jeep thing!

Sounds like this guy wants you to come to him so he can charge you the $300+ to do the job you can do for $50!

I looked up that part on your video and website for my 2005 chevy suburban 1500 series, but it claims it doesn't fit. On your video its printed that it fits my year.🤔

Very helpful! Thx

I love how she says do donuts tight Donuts I would say drive in tight circles because if you tell somebody under the age of 25 to do donuts in a parking lot that's not going to be good

Could they have made the space it goes into any smaller 9:47

My car AC was working fine before ...after I put that can in it's not working anymore.

THANK YOU DUDES I thought I was going to have to remove my whole bumper just to get to the housing. Had no clue about the trap door in the fender well

And where is the problems on the engine? 🤔 2.4 gdi has issues in the bearings of the crankshaft and to repair, you gonna spend to much money 😥 and the clock spring 😅

I have 2 8th gen civics ones a ex and the other a lx my ex seems to have more issues than the lx such as the wiper motor issue motor mount issue and sometimes the car dies when initial take off but all in all great reliable vehicles cheap to fix and are pretty cozy for the cost and reliability I would definitely recommend this vehicle to anyone first starter cars or if u want decent gas Milage and low maintenance I even put a hitch on my ex and it just hauls a trailer and atvs just fine

I paid $200 to get the AC issue diagnosed. It is my compressor, it has a leak, and they want $1.5K to change it. What! The $12 freon recharge works wonders for 1-2 months :) I guess I can live with that. The new OEM compressor is $250 BTW

I watched this video so I could put new door panels in my 66 El Camino and my 66 Chevelles. It’s perfect because they are identical I believe. Thanks!

No drain plug so stupid

The link should take you to the tool itself instead of the overall site, I couldn't find it and moved on.

These 5 things all occurred on my 14 Chrysler Town & Country. Please do a follow up and talk about the next 5! I would love to hear in case there is more to look out for. My horn and airbag have also gone out. Back to the dealership to look at them now.

No gasket sealer????

I always thought there was a gasket

Don’t spray this, continues to spray

I had a hard starting or long cranking problem only in the mornings. First thought was the fuel pump losing pressure overnight because once the car was driven it started fine the rest of the day. Long story short, it was the crank angle sensor going bad. Now I have the drivers window that has too much movement when going up. I took the door panel off but couldn't see where I would adjust out the play in the window regulator.

is the window problem a mercedes thing? i had a w210 which had quality issues with the power windows, a part made out of plactis just breaks a part and then you can't close the window anymore, very annoying

We have an 08 AWD model. Got it with 88000 miles on it 5.5 years ago and currently has 224,000 miles. Very few issues, mostly wheel bearings needing replaced. No engine or trans problems at all. It's been a super-reliable vehicle for us.

The 4.6 is the best one to own

2016 Rogue and there are a few minor issues but NOTHING has happened that caused me to not be able to drive it in these past 7 years of ownership. Great video❤

Mi pickup no prende

I want to see this done on a V6.

Really like that this technician actually uses the actual names of the different components in this video

Because it puts those waste of skins out of a job

They also have a issue with cradles rotting on passender side

Thanks!

thanks

If the bleeder screws have caps ensure you replace them when you finish. The caps stop crud and corrosion inside the bleed screws.

In December I had to replace my 1990 Volvo 240 wagon with 400,000 miles on the clock. My late mother's last car. Her next door neighbour had to stop driving, so i bought her car. Yoda is a 2004 with 100,000 miles on the clock. Had to change the catalytic converter because it started leaking. I also had to di front wheel bearings. That was a job and a half. Certainly not a do it yourself. Luckily I have a friend with a full machine shop. I put a set of Nokian Haakappilliitta R5 winter tires on. I do not like the front wheel drive in the snow at all, and im not crazy about it in the rain, either. I used to bigger, heavier, rear wheel drive, and that is my preference. Still, Yoda is doing the job. I do enjoy it over all. A little more room would be nice, though.

IT IS NOT A 15mm BOLT. IT IS A 14mm. ffs

Thank you so much

The battery completely died in my '02 Envoy and after I put a new battery in it, the next time I turned it on, it was in limp mode. Now I can't get it out of reduced engine power mode, when it idles, it's idling inconsistently, and the service engine soon light is also on. I have no idea what to do.. I thought it might be the TPS, or maybe a dirty throttle body, or perhaps it needs a throttle relearn? Has anyone else had this issue with theirs? How did you get it out of reduced engine power mode?

"Square cut seal" not a "gasket" that is inside the caliper

Great video ! Thank you!

Where is the brake light fuse located

Don’t jam it does it anyway

You should use a wood shim or chock to tap old cover off. Screwdriver can mar the surface

Spark plugs do not blow out on their own, people strip and damage the threads!! 02 F150 Harley-Davidson 474,390 miles, 22 years old.

I have every single one of those problems...

That will be 80 bucks from your local subaru dealer 😂

Great Video 🎉